top of page
LD SYSTEMS CURV 500 I AMP

LD SYSTEMS CURV 500 I AMP

$0.00Price
4-Channel Class D Installation Amplifier
 
Item No.: LDCURV500IAMP
 
  • 4 channels with DSP control
     
  • Purpose-designed for CURV 500® installations
     
  • Low-profile 1U 19" rackmount construction
     
  • Drives up to six CURV 500® satellites or one CURV 500® ISUB subwoofer per channel
     
  • Single push encoder operation
     
  • High-contrast OLED display
     
  • Temperature controlled low-noise fan
     
  • High-efficiency switch mode power supply
     
  • Only 6.8 kg

  • Description

    Purpose-designed for CURV 500® installations the iAMP® is a low-profile 4-channel Class D rackmount amplifier with high-efficiency switch mode power supply and 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD.

     

    Operating the iAMP® is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low- noise fan. Input is on balanced XLR and terminal block connectors. The iAMP® is capable of driving up to six CURV 500® satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.

  • Specification

    Product type Power Amplifiers
    Type Installation Power Amplifiers
    Rated ouput power (1kHz @ 2,7 Ohms) 4 x 240 W
    Rated ouput power (1kHz @ 4 Ohms) 4 x 240 W
    Rated ouput power (1kHz @ 8 Ohms) 4 x 120 W
    Rated ouput power (1kHz @ 16 Ohms) 4 x 60 W
    Output circuitry Class D
    Frequency response 10 - 22000 Hz
    Total Harmonic Distortion (THD) < 0,01 %
    Protection circuits DC , over-current , short circuit , soft start , thermal overload
    Controls Push encoder
    Indicators OLED Display
    Line inputs 4
    Line input connectors terminal block , XLR
    Loudspeaker outputs 4
    Speaker output connections Speakon compatible , terminal block
    Cooling temperature controlled low-noise fan, noiseless in idle mode
    Operating voltage Switching power supply
    Power consumption @ full load 1100W
    Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz , Switch mode power supply with power factor correction (PFC)
    Width 482 mm
    Height 44 mm
    Depth 420 mm
    Weight 6,8 kg
bottom of page